查看完整版本: 北电PASSPORT 8600 配置三板斧

北电PASSPORT 8600 配置三板斧

UPGRADE THE IMAGE
开机按enter进入monitor状态
monitor#net mgmt
monitor/net/mgmt # ip 10.1.110.2/24
monitor#copy 10.1.110.22480a3202.img /flash/p80a3202.img
monitor#copy 10.1.110.22480b3202.img /flash/p80b3202.img
monitor#copy 10.1.110.22480t3202.dld /flash/p80t3202.dld
monitor#choice primary image-file /flash/p80a3202.img
monitor#save
monitor#boot /flash/p80b3202.img

cwc=exit

特权模式默认用户名密码：rma


___________________________________________________________________________________________

PP8603 Password Recovery:


You could default the password as the following procedure.
1.Connect to the console port on 8691SF CPU
2.Reset the 8691
3.Enter the monitor mode
4.Type: (config bootconfig) flags factorydefault true
5.Type:save bootconfig
6.Type:reset
7.Alow the 8691 to completely boot to banner login screen
8.login with username "rwa" password "rwa"
9.Type:config bootconfig flags factorydefault false
10.Type: save bootconfig
11.Type:save config

_____________________________________________________________________________________________

The basic config for passport 8600

config bootconfig net mgmt ip <ipaddr/mask> [cpu-slot-id <#>]
save bootconfig
config bootconfig net mgmt route net <netaddr> <gateway>
save config
config sys set name <prompt>
config cli password ro <username> [<password>]
config cli password rwa <username> [<password>]
config sys set snmp community <ro|rw|l2|l3|rwa> <commstr>
config web-server enable
config web-server password ro <username> <passwd>
flags telnetd <true|false>
config bootconfig flags telnetd <true|false >
config sys access-policy enable true
313189-A
config sys access-policy policy <pid> service http
<enable|disable>
config sys access-policy policy <pid> service rlogin
<enable|disable>
Chapter 3 Basic switch configuration using the CLI 57
config sys access-policy policy <pid> service snmp
<enable|disable>
config sys access-policy policy <pid> service telnet
<enable|disable>

config cli password rwa capinfo capinfo
config bootconfig net mgmt ip 172.20.11.254
config sys set snmp community rwa capinfo
config bootconfig flags telnetd true
config web-server enable
config web-server password ro capinfo capinfo

你也可以用DEVICE MANAGER 来配置，但是初始的时候还是要用到以上的命令行方式。

回复 #1 haodongdong 的帖子

这是什么配置？

thanks

Thanks

感谢楼主，正在找北电的资料！

[quote]原帖由 [i]文子521[/i] 于 2006-9-5 21:36 发表 [url=http://www.sharecenter.net/redirect.php?goto=findpost&pid=1213148&ptid=122691][img]http://www.sharecenter.net/images/common/back.gif[/img][/url]
这是什么配置？ [/quote]
应该是北电交换机的系统管理配置

没看懂啊