查看完整版本: 华为和CISCO端口聚合问题

华为和CISCO端口聚合问题

在CISCO 3560交换机上设置如下：
[size=4]nterface Port-channel1
switchport mode trunk[/size]
[size=4]interface FastEthernet0/2
switchport mode trunk
channel-group 1 mode on [/size]
[size=6][size=4]interface FastEthernet0/3
switchport mode trunk
channel-group 1 mode on[/size] [/size]
[size=3]在华为3100上设置如下[/size]
[[size=4]H3C] link-aggregation group 1 mode manual[/size]
[size=4][H3C] interface ethernet1/0/1[/size]
[size=4][H3C-Ethernet1/0/1] port link-aggregation group 1[/size]
[size=4][H3C-Ethernet1/0/1] interface ethernet1/0/2[/size]
[size=4][H3C-Ethernet1/0/2] port link-aggregation group 1[/size]
[size=4][H3C-Ethernet1/0/2] interface ethernet1/0/3[/size]
[size=4][H3C-Ethernet1/0/3] port link-aggregation group 1[/size]


在进行大文件传输时候，华为和CISCO的交换机都只有一个口的灯在闪动，请问如何参看配置是否正常，谢谢！

我记得cisco默认的channel的工作模式不是负载的.