各位大哥,我有一个pix-501 的配置问题想请教
我用pix-501 来连接网络.
达到的要求是:
1.能上外网
2. 把192.168.1.7 映射到外网
3.打开21和22端口
配置如下:
interface ethernet0 auto
interface ethernet1 100full
nameif ethernet0 outside security0
nameif ethernet1 inside security100
ip address outside 221.2.238.226 255.255.255.252
ip address inside 192.168.1.1 255.255.255.0
global (outside) 1 interface
nat (inside) 1 192.168.1.0 255.255.255.0 0 0
static (inside,outside) tcp 221.2.238.226 21 192.168.1.7 21 netmask 255.255.255.255
static (inside,outside) tcp 221.2.238.226 22 192.168.1.7 22 netmask 255.255.255.255
conduit permit tcp host 221.2.238.226 eq 21 any
conduit permit tcp host 221.2.238.226 eq 22 any
route outside 0.0.0.0 0.0.0.0 221.2.238.226
但配置完后不能实现,能帮忙看看吗?
